The rear surface of your car can be disfigured by little rocks, and any other substance. In a bid to prevent this we usually have a vinyl black bra installed. However, installing a black vinyl bra in the bumper of the car doesn’t make it attractive. This is where the paint protection film comes in. With the Paint protection Film on your car, you can protect the bumper of your car from debris and road chips.
There are several varieties and brands of paint protection film. This invention was developed initially to protect helicopter rotor blades during the War. However, needs and demands for this piece crept into the auto-mobile industry. The inventors later redesigned it to be used in the front bumpers and at the hood of cars.
In no time, this invention took off because it happened when enhancement in design in the auto industry was happening. This invention was unbeatable because car owners would apply this film to bumpers and hoods. Then drive their $250,000 Ferrari anywhere without the fear of getting a rock chip. The process of applying the paint protection film at first used to be time-consuming. This allowed it to take a while to trickle down into the mainstream of the vehicle industry. There was a demand, an increased demand for an easier way of fixing car protection. New companies sprung up, and the design kits that could be executed in minutes came to light. Another issue about the development of the paint protection film is its warranty. On aircraft, it was replaced annually, but people wanted it to be longer for cars. That is why most Paint Protection films these days have a 5-7 years lifetime warranty.
What Is A Paint Protection Film?
The paint protection film protects the paint of your car. It is made of thermoplastic urethane, created to be applied to the painted surfaces of a car. The Paint protection film aims to protect the car’s surface from scratches from stone chips, bug splatters and other minor abrasions. This thin transparent film saves the car from damage caused by flying gravels as you drive.
How to Install Car Paint Protection Film
If you’re thinking of installing a car paint protective film by yourself, these steps can be of help.
- Make sure you start installing in a clean, dust-free environment. You cannot install a paint protection film in a dusty area.
- Get your supplies. Your supplies include the roll of film, the kit, knife, squeegee and your application solution.
- Taking a measurement is the first practical step. You cut out the film to fit your car. This is the most challenging part because you must be precise in your measurement. The custom-designed kits usually have a pre-cut fit for some car models.
- The next process is to prepare your vehicle. Wipe it very well. Ensure it is entirely spotless because the dirt you omit can be trapped under the paint film.
- Make use of your application solution to wet the area thoroughly. Then remove the backing from the film carefully. Next, you make use of the squeegee to smooth out the water and the air bubbles. It is best if you begin from the center then work your way outward for optimum results.
- Once you have the film in place and all the bubbles squeezed out. You use the knife to trim off the excess part of the film. You can learn to install Car paint Protection Film here.
Please Note: Unless you are familiar with this process, it is best to get a specialist to help install the protection film. Having professional help would ensure that the job is done correctly.
It is pivotal to note that when a paint protection film is new, it can handle a fair amount of scratches and abuse. However, you must understand that it would eventually be replaced. Removing the film is a simple process that doesn’t require much skills and a lot cheaper than repairing a damaged car paint job. The process of removing an old film isn’t going to damage the vehicle surface in any way. Also, the paint protection film can be used to protect any part of the vehicle. You may choose to protect just the headlight or the taillight covers, or the rear.
You won’t be reading this article if you do not care about keeping your car in the best condition. Or you might be a daily commuter making use of your car almost every day. The film is for a car owner who is sure to own the car for five years or more. The owner is concerned about maintaining the car to resale at a good value.
When Shopping For An installer
There are several professional car paint protection film installers. However, when looking around for an installer, you need to look for a company with enough professionals and experience. Most times, good work is never cheap, and cheap work is never good. So you must be ready to spend a reasonable amount. Anyone can purchase a film, but not everyone can install or recognize the best car quality. Installing a Car paint film protection requires years of experience to master. Go for the very best. It would be tragic if you invest much money into a new car but get a less-quality job that doesn’t serve its purpose. Once the film is handled professionally, it would be easy to maintain.
The cost of installing and even purchasing a car paint protection film is not cheap. For covering the bumper alone, you can spend up to $450. However, to repaint a bumper might cost you $700 and above. So whenever you’re installing a paint protection film, you can consider it as one-time protection for your car.
In conclusion, you can use the paint protection film on your car’s parts that are not painted. You can apply it to the plastic taillight and headlight. They perform the same function because films are thin and invisible. It would save you a ticket.